Testing & Diagnosis Services

Electrical Testing

CSI electrical testing and inspection team understand electrical testing regulations and can perform the tests or supervise the test carried by others and submit test report, CSI team will ensure all electrical installation and appliances are fully compliant with the standards and regulations after successfully testing. 

Sound & Vibration Test

CSI is equipped to provide advanced noise and vibration testing by blending the best of both traditional and leading-edge technologies to identify the types and characteristics of noise & Vibration along with identifying appropriate control measures.

Clean Room Test

The act of evaluating the performance of a cleanroom by performing a series of defined tests with prescribed procedures and reporting requirements, CSI experience in cleanroom systems ensure these critical areas are performing in accordance with international standards and customer quality specifications.

HEPA Filters Testing

CSI comply with international and local testing standards and regulations during HEPA filters testing

Network Test

Network testing is an investigation conducted to provide stakeholders with information about the quality of the product or service under test. Network testing can also provide an objective, independent view of the network to allow the business to appreciate and understand the risks of network implementation.

Medical Gas and Laboratory System

CSI ensure the proper procedure and standards are used for verification of laboratory and medical gas systems. Leak pressure testing standards and anti-confusion testing are measure requirements that need to be demonstrated before acceptance.

Thermal Imaging Test

Infrared inspection or Thermography, is used throughout industry as a key diagnostic tool for finding problems. Infrared inspections are a non-destructive, non-contact and a cost effective way to detect and document defects.

Building Envelope (Building Tightness)

Due to the increased interest in high-performance buildings, more attention is being paid to how envelope assemblies affect interior comfort and energy performance. CSI can carry out effective commissioning of building envelope assemblies including air intrusion, water intrusion, and thermal intrusion. 

Duct Leakage Test

Duct testing can indicate the relative leakiness of the ducts and help determine whether the duct system should be sealed, repaired, or renovated. Duct testing is strongly recommended when a new heating and/or air conditioning unit is being installed.

Indoor Air Quality (IAQ)

CSI can provide an indoor air quality assessment that will instigate good environmental management of every aspect of workplace.

Tunnel Ventilation Test

Tunnel ventilation systems serve to improve the safety of the tunnel users. In first order, they can ensure a sufficient visibility in the tunnel for safe traffic, and prevent concentrations of noxious gases from reaching critical values. 

Cold Smoke Test

CSI can provide cold smoke test that will perform on smoke control systems in underground railway stations, car parks, etc to play a crucial safety role during emergency conditions, and the testing and commissioning phase of these subsystems require a comprehensive set of approved and audited step-by-step test procedure and methodology.

© 2021 All Rights Reserved - Privacy Policy